BDRBS - CHEVRON THINNER 325
- MSDS: BDRBS
- Manufacturer: CHEVRON U S A INC
- Product Name: CHEVRON THINNER 325
- National Stock Number: 6850-00-264-9038
Product Identification
Product ID:CHEVRON THINNER 325
MSDS Date:01/01/1987
FSC:6850
NIIN:00-264-9038
MSDS Number: BDRBS
Responsible Party
SAN FRANCISCO, CA 94120
US
Cage: 81230
Contractor
Telephone: 800-414-6737 / 800-582-3835
Cage: 81230
Ingredients
PARAFFIN WAX
CAS: 8002-74-2
RTECS: RV0350000
Fraction By Weight: 99%
OSHA PEL 2 MG/M3 (FUME)
ACGIH TLV: 2 MG/M3 (FUME); 9192
AROMATICS(MORE THAN 8 CARBONS)
Fraction By Weight: <1%
BENZENE (SARA III)
CAS: 71-43-2
RTECS: CY1400000
Fraction By Weight: 0.02%
OSHA PEL 1PPM/5STEL;1910.1028
ACGIH TLV: 10 PPM; A2; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Effects of Overexposure:MILD IRRITANT TO EYES & SKIN.SLIGHT ACUTE
TOXICITY BY INHALATION & INGESTION.
First Aid
First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:101F/38C(TCC)
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ELIMINATE ALL OPEN FLAMES IN VINCINITY. CLEAN
UP SPILLS A.S.A.P. ABSORB LARGE SPILLS W/ABSORBENT CLAY,EARTH,ETC.
Handling
Handling and Storage Precautions:DO NOT USE OR STORE NEAR
FLAME,SPARKS,OR HOT SURFACES,ONLY IN WELL VENTILATED AREAS.
Other Precautions:DO NOT USE PRESS TO EMPTY DRUM OR EXPLOSION MAY
RESULT. EMPTIED CONTAINER MAY STILL CONTAIN HAZ VAPOR OR LIQ.
Exposure Controls
Respiratory Protection:NIOSH/MESA APPR SCBA/AIR SUPP RESPIR.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:310-370F
Vapor Pres:5
Vapor Density:4.8
Spec Gravity:0.78
Evaporation Rate & Reference:0.22,BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS LIQ.
Percent Volatiles by Volume:99
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATL.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO FROM INCOMPLETE COMBUSTION
Disposal
Waste Disposal Methods:PLACE CONTAMINATED MATL IN DISPOSABLE CONTAINERS
& BURY IN AN APPROVED DUMPING AREA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.